Professional industrial cleaning backed by

    decades of experience

    

                                                                    « Mouseover pictures for descriptions»

Dry Ice (CO2) Blasting.

 

This specialized cleaning technology uses frozen dry ice pellets at supersonic speeds to blast away residues from industrial equipment.

The dry ice pellets sublimate into CO2 gas leaving no secondary waste stream to remove.  And with nothing to remove but the contaminant itself, clean-up is much easier.

 

Dry ice blasting is similar to cleaning or blasting with sand except for at least one major difference.  Sand blasting requires that the sand, used in the cleaning, be removed from the site.  It's the same for pressure cleaning with water.  Both sand and water leave behind a secondary waste stream that has to be removed.

 

Cleaning with dry ice is a superior industrial cleaning method for equipment and machinery.  Since equipment and machinery can generally be cleaned in-place where it stands, it's faster, more cost efficient, and environmentally friendly.

 

To learn more about this industrial cleaning technology, pllease visit our CO2LDTECH website by clicking on the Dry Ice Blasting link above.

 

Dry Ice (CO2) Blast cleaning. Dry ice blasting

 

The picutres above show dry ice blasting to clean rust from a power generator's gas turbine compressor and debris

from tenter clips used in the manufacture of fabric.  The tenter clips are being cleaned on the production line.   

  

Below are before and after photos of a polymer manufacturing machine cleaned while on the production line.                                                      

 

dry ice blasting of industrial machinery dry ice blasting of industrial machinery

Self-Contained Workforce


We are a Georgia based, industrial cleaning company near Atlanta, serving Alabama AL, Georgia GA, Florida FL, Mississippi MS, North Carolina NC, South Carolina SC, and Tennessee TN. Our industrial cleaning service units are mobile and we will come to your location, anywhere in the southeast to perform the cleaning operation to your satisfaction. We have the latest industrial cleaning equipment and our staff is highly skilled and trained.

 

All of Blackwell's personnel undergo vigorous ongoing training to certify that the professional acumen will meet your specific facilities requirements. Courses include, but are not limited to: Lockout, Tagout, Confined Space Entry, MSDS, Respiratory, Protection, and Safety Hazards in the Work Place as well as Fall Protection. Our safety director will review your facilities specific safety program with associates prior to job mobilization. 

dry ice blasting

confined space
We have a crew of 25 men which gives us the ability to be on multiple jobsites throughout the southeast. 
We stress jobsite safety with all our crews and regularly hold safety training courses including confined
space energency rescue using our confined space simulator.  Our crews work nearly 50,000 hours on a
yearly basis and to date, we are within one month of reaching our goal of 1000 days without a work
related injury.

 

 

 

 

No Cross Contamination

 

The EPA recommends the use of barriers or containment rooms to contain the dusts and other pollutants created during renovations.

 

Years of cleaning experience and learning allow us to provide proper industrial cleaning techniques and methods to get the most difficult cleaning or surface preparation projects accomplished without contaminating other machines. We are well versed at arduous environmental controls including containment erection and ventilation. . 

containment room, containment area

This 10 X 30 containment room was constructed to

prevent dusts and residues from contaminating nearby

equipment during this concrete floor repair.

 

http://blackwells-inc.blogspot.com/2013/01/indoor-air-quality-during-renovations.html

 

 

 

Confined Space Cleaning


Innovative industrial cleaning techniques utilizing cleaning methods developed by chimney sweeps over the centuries, coupled with today's technology and safety are used to remove contaminants from your ductwork thereby improving exhaust and ventilation efficiency. Many hazards can develop if ductwork is not kept clear of debris. Maintaining ductwork cleanliness helps ensure a safe environment as well. 

 

Blackwell's specializes in cleaning areas that require special procedures for  entrance and egress. Dependent upon the surface contaminant, tank construction and composition, we have a way to clean out the interior of your vessel. 

 

Training in the operation of personnel lift equipment and fall protection, and containment construction, make our professional associates the bat removing contaminants.

 

Cleaning of industrial silos are a big part of our work.  Coffee, flour, grain, pepper, and sugar are all contained in silos, and we've cleaned them all.

 

Industrial cleaning of ductwork. Blackwell's associate inside the confined space of the latex tank.

When we send one of our associates into a confined space, we send someone that's trained to work in tight, potentially dangerous places. Depending on the confined space, our associates can be equipped with, but are not limited to: supplied air, safety harness, ear and eye protection, and a communication device.

 

http://blackwells-inc.blogspot.com/2013/05/a-confined-space-can-be-dangerous-place.html        

 

Specialty Cleaning

 

The industrial cleaning division of Blackwell's addresses situations within facilities that require specialized cleaning training and techniques. Should you require confined space work, hot or cold pressure cleaning, dry ice (CO2) blasting, or cleaning specialties such as: ductwork, ceilings, production machinery, silos, storage tanks etc., we are the professionals with decades of industrial cleaning experience on our teams. Just give us a call!

 

Industrial cleaning of filters.

industrial cleaning of ovens

Industrial cleaning of grain silo.

 

   

   

 

 

 

 

 

 

 

 

 

 
 

 

     

  

Shotblasting / Sandblasting

 

Whether it is blasting contaminants from substrates with steel shot, high pressure water, dry ice blasting, sandblasting, or scraping with pneumatic scrapers, we can clean it. Blackwell's Inc. can also provide a non-skid surface via shot blasting of slick concrete surface, and Diamond and Carbide removal of horizontal surface contaminants.  

 

Shotblasting

sandblasting to remove rust.

epoxy coating

 

  

  Got an unusual industrial cleaning project . . . like a pallet lift encased in plastic?

 

  Cleaning of equipment.

 

  Let's discuss it and come up with a cleaning solution.

 

  http://blackwells-inc.blogspot.com/2013/05/a-floor-tugger-in-plastic-makes-for.html

 

 

  

 

 

 

 

Facebook f